If you're a fan of full-sized dive knives you're going to appreciate SCUBAPRO's all-purpose K6. Featuring a quality stainless steel blade with a traditional clip point, the K6 offers a fine hollow-ground cutting edge on the lower edge of the blade (best for making clean slicing cuts), and a serrated edge on top (best for sawing through rope). There's also a notch for cutting line. The contoured handle has a finger indent and a ribbed texture to make it easy to maintain a solid grip, even when wearing wet gloves. On the base of the handle a stainless surface can be used for hammering. The K6 comes with an injected molded sheath and delivers all the cutting power and handling convenience you're ever going to need.
Quality stainless steel blade offers both hollow-ground and serrated cutting edges along with a line-cutting notch.
Easy-grip handle is full-sized and includes a stainless hammer.
Line-cutting notch is provided for additional convenience.
Includes an injected molded sheath and two quick-adjusting buckle straps.
1 lb | 0.454 kg
Regular price$32.00 USD
24 in stock
This Seac Dive knife has a AISI 420 tempered stainless steel blade and a stainless steel end-cap hammer at the end of the grip. The blade is 120-mm or 4.7in long, with straight edge on one side and serrated edge + line cutter on the other. The grip is over-molded with soft thermoplastic rubber providing a non-slip surface for a safe grip. A hole for fastening the line is provided at the end of the grip. Rigid sheath with large knife release button in the center.
AISI 420 tempered stainless steel blade
Stainless steel end-cap hammer
Straight and serrated edges
Soft thermoplastic rubber grip
Rigid sheath with large knife release button
120mm or 4.7in
What's in the package?
Knife, Blade housing, Straps & Manual
Diving Gear, Freediving, Apnea, Snorkeling
Regular price$272.00 USD
3 in stock
The SCUBAPRO TK15 is a tactical dive knife built around a single piece of marine-grade stainless steel that’s been machined to achieve the ideal balance of strength and weight. Its polished surface lets the water drain easily and prevent oxidation. The thickness of the stainless steel is consistent from one end to the other, creating a high level of stiffness. The blade features a lower smooth-edge and an upper serrated edge close to the handle to maximize control of the cut. There’s also a shackle key and a line cutter. The knife comes with a heavy-duty handle and a fiberglass-reinforced polyamide sheath with nylon straps. Also included is a SCUBAPRO branded hand cover with bungee for securing the knife to the hand in critical dive conditions.
Built with marine-grade stainless steel, the best material for maintaining cutting edge reliability and resisting corrosion.
Substantial 6in/15cm blade offers plenty of heft and cutting power.
Both smooth and serrated blade edges are designed to meet any cutting situation.
Heavy-duty handle with stainless steel screws provides a reliable hand-hold when wearing gloves.
Fiberglass-reinforced polyamide sheath with nylon straps delivers reliable knife protection.
Red tab on the underside of the Velcro leg strap keeps the sheath secured on the leg when pulling the knife out for use.
Recesses in the handle matched to teeth in the sheath enable the knife to stay securely in place.