Delivering excellent propulsion and easily used by anyone, Mew Fins are the best-choice standard full-foot fins for scuba diving and skin diving.
Foot pocket designed
The foot pocket is formed using a thin and pliant rubber material. This makes the fins easy to put on and take off.
Blade tip shaped
With fins designed to make optimal use of the resilient properties of rubber, firmly catching the water, from the start to the end of the kick cycle, you get solid propulsion.
Made from kinugawa Rubber N˚1 of fins made by specialist domestic makers, during FY 2016 in diving shops in Japan, Gull rubber fins are the top sellers (in-house market analysis).
Size a b c
520 × 190 × 75 mm
540 × 190 × 78 mm
550 × 200 × 81 mm
580 × 210 × 84 mm
620 × 220 × 87 mm
SUPER MEW XX
Regular price$189.00 USD
Maximizing the resilient properties of rubber, the Super Mew is the most powerful strap fin for scuba diving and skin diving
Sole designed to transmit power to the blade tip
The slightly thicker-than-usual design ensures obedience to your will. Even when you are kicking powerfully, force is efficiently transmitted to the blade tip.
Boot pocket designed to fit as well as full-foot fins and make it easy to get in to and get out of the fins
In the boot pocket, along sole and high instep minimize lateral slippage of the toe end of the boots. An even better fit is possible if you pair them with Gull GS boots, which were designed for use with these fins.
Newly designed blade
While inheriting the width of the Super Mew, these fins are shorter. You get the same easy maneuverability, and even the same feel, as Super Mew. Naturally, the Gull line is made for horizontal movement but, for times when you need to go straight up, these fins are designed to catch the water.
Hybrid rubber delivers even greater propulsion
To enable these fins to powerfully, yet smoothly, deliver tenacious propulsive power, different pliant and resilient types of rubber are used for the foot pocket, blade, and ribs.
Ribs designed to firmly catch the water
Making the ribs the same height on the top and bottom of the blade has radically improved rebound performance.
Optimized blade-tip line
The end of the blade is shaped to allow water to smoothly escape. Because the blade rebounds more quickly, throughout your session, you can efficiently keep on kicking.
Fin bottoms made for ease of use and safety
Supergrip system Complementing the all-over thickening of the sole, grip has been improved with a new tread pattern.
Hyperdimple system Suppressing turbulence, dimples send more kick power into propulsion
Water-flow smoother system For more efficient propulsion, water is effectively channeled rearwards rather than to the sides
Size a b c d
540 × 196 × 90 × 85 mm
560 × 200 × 100 × 90 mm
580 × 214 × 105 × 95 mm
$159.00 USDSale price$139.00 USD
A strap fin that with a light kick that enables a nimble feeling of mobility and makes scuba diving and skin diving comfortable and enjoyable.
A lightweight and compact design for ease of use both underwater and on entry and exit
With a blade length shorter than ordinary fins, these are designed for ease of use and lighter weight. Under water, the compact design offers agility and less chance of damaging coral or other marine life. These are also easy to get on and off and tote, even when donning gear on land or on a cramped boat, achieving comfortable entry and exit.
Boot pockets that achieve both the outstanding fit of a full-foot design and ease in getting on and off
These feature a boot-pocket design boasting a long sole and high instep that snugly envelops the entire foot. This achieves a fit of outstanding comfort, along with conveying leg power with the same ease as full-foot fins for unflagging propulsion.
A middle-range blade design for maximum enhancement of exhilarating fin work and efficiency
Designed with a blade length shorter than ordinary fins, these also shorten the time for which the rubber material flexes to help accomplish nimble and efficient fin work. Moreover, to achieve maximum performance in these middle-range fins of the sense of pliant grip obtained when using rubber fins, the height of the keel at the rear has been slightly lowered, for a design that yields greater comfort.
Fin bottoms made for safety and ease of use
Complementing the all-over thickening of the sole, grip has been improved with a new tread pattern.
A state-of-the-art rubber configuration helping to achieve both light kick feel and sure propulsion
A state-of-the-art protruding configuration is used for fins that delivery sure propulsion and won’t come loose even with forceful kicking.
Size a b c d
SEAC SCUBA F1 FINS
Regular price$149.00 USD
•Blade material: high-performance compound of Ultralight Flex technopolymers with excellent impact resistance, even at low temperatures
• Foot pocket material: combinations of technopolymer and thermoplastic elastomer
• Strap: with Sling Strap System, color coordinated with the blade
SEAC SCUBA GP100 FINS
Regular price$119.00 USD
•Blade material: high-performance technopolyme
•Foot pocket material: thermoplastic elastomer
•Strap: with Sling Strap System
JET FIN W/ SPRING HEEL STRAP
Regular price$157.00 USD
SCUBAPRO's JET FIN is famous. This distinctive fin design set the standard for power and durability when it was first introduced 50 years ago. Its durable rubber construction and beefy shape can still be seen on dive boats, research vessels and in the world's most remote dive locales. Tech divers, deep divers, military divers, commercial divers and dive instructors, as well as old-school recreational divers, still strap on a pair of JET FINS before hitting the water. There are many imitations, but there is only one JET FIN.
Rubber construction is known for its durability, promising a lifetime of use.
Proven vented design decreases drag on the up stroke and enhances thrust on the down stroke.
Choose from an adjustable rubber heel strap or a self-adjusting stainless steel spring heel strap.