This 2mm hooded wetsuit vest will provide you lightweight protection without reducing your range of motion. Since we lose a large percentage of our body heat through our head, this hooded vest will keep you warm and protect against heat loss in and out of the water.

Also, this vest is fantastic for protecting your head, neck and torso from the elements, including sunburn and stings. Unlike traditional hoods, the vest gives you complete coverage on your neck, and keeps your core temperature controlled as well.

It is also perfect for layering under your wetsuit for additional warmth, especially in our brisk California waters, and it can be worn all year long. Addtionally, this hooded vest is also an ideal piece to wear on its own for swimming, paddling, diving, snorkeling and many other activities, or when you are diving in warmer locations and do not want to wear a full wetsuit. 

총 스톡에 밴드를 고정하는 데 사용되는 벨크로 스트랩으로 플로트 라인을 정리할 수 있습니다.

건 스톡/밴드/비닐 및 번지 플로트 라인용

*(1) 스트랩 가격입니다.

트라이던트의 잠수복 클리너로 값비싼 잠수복이 변질되지 않도록 하세요! 이 고농축 포뮬라는청소, 냄새 제거 및 염분 제거에 도움이 됩니다. 또한 향후 사용과 최대 수명을 위해 잠수복의 상태를 유지하는 데 도움이 됩니다.

기능

• 냄새 제거!
• 잠수복의 수명 연장
• 사용하기 쉬움
• 보관을 위해 잠수복을 조절합니다
• 모든 네오프렌 제품에 적용됩니다.
• 8온스 병
• 강사의 선택

개요

NitroB 열처리된 스테인리스 스틸로 스테인리스 스틸 케이블, 모노필라멘트 및 하이테크 라인을 절단할 수 있습니다. 내식성을 위해 코팅된 테프론. 높은 가시성, 안전 주황색 손잡이

4.5" 블레이드, 9.5" 전체 길이

Wrangler Knife는 Deluxe 설정과 함께 기본으로 제공됩니다.

* 디럭스 - 칼집, 나이프 키퍼, 고무 다리 스트랩, 팔뚝/다리 스트레치 스트랩 및 랜야드

기능

• NitroB 열처리 스테인리스강
• 내식성 테프론 코팅

사양

• 4.5" 블레이드, 8.5" 전체 길이

랍스터 시즌이 다가오고 XS Scuba의 인기 있는 Bug Grabber가 입하했습니다! 손끝은 재설계되었으며 케블라 소재로 덮여 있습니다. 랍스터는 이것을 착용한 상태에서 그립에서 미끄러지지 않습니다. 새로운 패턴이 제공되고 핏이 개선되어 그립과 손재주가 향상됩니다.

• 랍스터 다이빙을 위한 완벽한 장갑
• 케블라 팜이 있는 2mm 네오프렌
• 케블라로 감싼 엄지와 손가락 끝 디자인
• 조절 가능한 벨크로 손목 잠금장치
• XS-2XL에서 6가지 사이즈 제공

기능

• 50파운드 긍정적인 상승도
• 2단계에서 쉽게 채울 수 있도록 배플이 있는 유출 방지 바닥
• 경구 및 BC QD 팽창기 조합
• 비울 때까지 부풀려진 상태로 유지됩니다.
• 수동 해제를 위한 당김이 있는 2인치 직경 OPV 
• 롤업하여 컴팩트한 사이즈로 벨크로 스트랩으로 고정합니다.
• 화학광 부착을 위한 상단의 탄성 루프
• 슬레이트 부착용 상단의 스테인리스 스틸 D링
• 하단에 스테인리스 스틸 D링이 있는 리프팅 스트랩
• 오렌지색으로만 사용 가능(p/n AC060-OR)

Keep Your Dive Gear Secure and Within Reach

The XS Scuba Locking Retractor is a simple but extremely useful accessory for keeping important dive gear secure, streamlined, and easy to access underwater.

Perfect for lights, gauges, cameras, slates, or other accessories, the retractable cable helps prevent dangling gear while allowing quick access when needed.

Why We Use It

Keeps Gear Streamlined
Prevents gauges, lights, or accessories from dangling and dragging during the dive.

Quick Access Underwater
Pull out your gear when needed and let it retract back into place automatically.

Locking Function Adds Flexibility
Cable can lock open, closed, or anywhere in between depending on your setup.

Very Useful for Accessories
Works especially well for:

• Flashlights
• Cameras
• Consoles
• Slates
• Small tools

Key Features

• Locking retractable cable system
• Locks open, closed, or mid-extension
• Stainless steel split ring attachment
• Delrin snap hook attachment
• Nylon lanyard connection
• Corrosion-resistant construction
• Compact, lightweight design

Ideal For

• Dive lights
• Gauges and consoles
• Underwater cameras
• Slates and wet notes
• Lobster diving setups
• Recreational and technical diving

Specs

Extension Length: 42 in / 107 cm

Pull Force: 12 oz / 340 g

Breaking Strength: 80 lb / 36 kg

Cable Material: Spectra / Nylon

Locking Feature: Yes

Dimensions:
2.6 × 2.2 × 0.8 in
(66 × 56 × 20 mm)

Part #: CL18

Attachment Options

• Stainless steel split ring
• Nylon lanyard attachment
• Delrin snap hook for BC attachment

Blue Holic Tip 🌊

Retractors are one of those small accessories that make a huge difference once you start carrying more equipment underwater. They help keep your setup cleaner, safer, and easier to manage.

Keep Sand, Water & Mud Out of Your Car

Beach divers know the struggle—wet wetsuits, sandy boots, and muddy gear quickly turn the back of your car into a mess. The XS Scuba Landing Pad solves that problem with a simple and effective design.

This large circular changing pad lets you stand on a clean surface while removing your wetsuit and boots, then quickly converts into a sealed gear bag that keeps sand, water, and mud contained.

Perfect for shore dives, beach entries, and muddy dive sites, the Landing Pad keeps your gear organized and your vehicle clean.

How It Works

1. Spread the Landing Pad flat on the ground (36 in / 91 cm diameter).

2. Stand on the pad while removing your wetsuit and boots.

3. Pull the two handles to cinch the pad closed around your gear.

4. Secure it and toss it in the trunk—sand and water stay contained.

Why We Like It

Clean Gear Changes
Provides a clean surface to stand on while changing out of wetsuits and dive boots.

Keeps Sand & Water Contained
The drawstring-style closure traps sand, mud, and water inside.

Perfect for Shore Diving
Great for beach dives where gear often ends up covered in sand.

Large Changing Surface
36-inch diameter gives you plenty of room to change comfortably.

Simple & Durable Design
Built tough for repeated use at beaches, docks, and dive sites.

Ideal For

• Shore divers

• Beach diving

• Kelp forest dives with rocky entries

• Divers who want to keep their car clean

Specs

Product Type: Gear Changing Pad / Gear Bag
Diameter: 36 in (91 cm)
Brand: XS Scuba
Condition: New

Activity: Recreational Diving

Blue Holic Tip 🌊

If you regularly dive Casino Point or do a lot of shore diving, this simple add-on makes gearing up and packing down much easier.

Upgrade your regulator setup with the XS Scuba Miflex High-Pressure Carbon HD Hose. At 32 inches (81 cm), it provides a practical hose length for connecting a submersible pressure gauge (SPG) to your scuba regulator’s high-pressure port.

Miflex HP hoses are approximately 35% thinner and half the weight of traditional rubber hoses, helping reduce bulk while keeping your equipment streamlined. The durable braided-nylon exterior offers dependable protection, while shock-absorbing strain relief at both fittings helps minimize stress where hoses commonly experience wear.

Nickel-plated brass fittings provide corrosion resistance and lasting performance in demanding dive environments. The hose is also approved for use with gas mixtures containing up to 40% oxygen.

Key Features

• 32-inch (81 cm) high-pressure scuba hose
• Approximately 35% thinner than traditional rubber hoses
• About half the weight of a comparable rubber hose
• Slim 7.8 mm outside diameter
• Durable braided-nylon exterior
• Graphite carbon color
• Electroless nickel-plated brass fittings
• Shock-absorbing strain relief on both ends
• 7/16"-20 male and female connections
• 14 mm-deep air-spool well
• Green Viton O-ring on the male fitting
• Approved for oxygen concentrations up to 40%
• Manufacturer part number: MHP32-CN

A lightweight, low-profile replacement for a conventional rubber gauge hose, the 32-inch Miflex Carbon HD HP Hose is an excellent choice for recreational, technical, and travel scuba configurations.

Please note: This is a high-pressure hose intended for compatible scuba gauges and regulator systems. Confirm hose length, fitting compatibility, and oxygen-cleaning requirements before installation.

Simple, Reliable Underwater Navigation

The XS Scuba QuikVu Compass is a compact retractable dive compass designed for easy underwater navigation and quick access during dives.

With a large viewing window, bright luminescent dial, and retractable attachment system, it keeps navigation simple while staying streamlined and secure on your gear.

Why We Use It

Easy to Read Underwater
The large gun-sight style viewing window makes headings easier to read while swimming.

Always Accessible
Retractable design keeps the compass secure and streamlined while allowing quick deployment when needed.

Great for Navigation Training
Excellent for Open Water navigation practice, Advanced courses, and shore diving.

Reliable Movement Underwater
Strong internal magnets provide fast response and stable readings.

Key Features

• Retractable compass system
• Large gun-sight style viewing window
• Luminescent compass dial
• Precision sapphire jewel movement
• Strong internal magnets for fast response
• Large 360° ratcheting bezel
• Accurate readings across wide tilt angles
• Snap hook and split ring attachment options

Ideal For

• Recreational scuba diving
• Shore diving
• Navigation training
• Advanced Open Water students
• California diving
• Divers wanting streamlined gear setups

Navigation Features

Large Viewing Window

Makes heading alignment easier while swimming underwater.

Wide Tilt Compensation

Maintains accurate readings even when not perfectly level.

Luminescent Dial

Improves readability in lower visibility and darker conditions.

Attachment Options

• Snap hook attachment
• Split ring attachment
• Retractable system keeps compass close and streamlined

Specs

Model: GA425

Compass Type: Retractable analog compass

Bezel: 360° ratcheting bezel

Dial: Luminescent

Blue Holic Tip 🌊

Retractable compasses are especially nice for California shore diving because they stay tucked away until you need them, reducing dangling gear and clutter.