Carbone Redline Freediving Suit, 5MM
Carbone Redline Freediving Suit, 5MM
Carbone Redline Freediving Suit, 5MM
Carbone Redline Freediving Suit, 5MM
Carbone Redline Freediving Suit, 5MM
Carbone Redline Freediving Suit, 5MM
Yazbeck

Carbone Redline Freediving Suit, 5MM

Regular price $485.00 USD
0 in stock

The REDLINE Carbone wetsuit comes all lined with our Abyss Black Titanium

FEATURES:

  • Impermeaflex™ Lamination
  • Carbone Holoblend Camo Sublimation Dye
  • 5.0mm Yamamoto High Density Freediving Grade 100% CR # 39 Neoprene
  • 100% “Green” Chloroprene
  • Version: REDLINE
  • Abyss Black Titanium NanoPreneShield lining on Open/Split Cell
  • The elbows, knees and seat area of the jacket are screened Polyurethane Inkdots for increased protection
  • Twin Yazbeck Locking Clips on Beaver Tail
  • Unisex Sizing
  • External Features of the Jacket:
    • Zipless Hooded jacket
    • Built-in hood designed for optimal breathing comfort, neck movement and complete face protection
    • Face seal is laminated with Impermeaflex™ for the ultimate in suppleness
    • Built-in thick cushioned and slip-free spear-gun chest loading pad for maximum ease and safety
    • A Wider Beaver tail with twin Yazbeck Locking Clips
    • Each cross seams on the jacket exterior is stamped with a GlueDot
  • External Features of the Trousers:
    • Zipless Farmer John / Long John trousers
    • The upper part of the farmer john is laminated with Impermeaflex™ for the ultimate suppleness.
    • 2 patches of KevDot are applied on top of the GlueDot on the 2 cross seams in the crotch panel
  • Internal Features of the Jacket and Trousers:
    • Abyss Black Titanium NanoPreneShield Lining
    • Thanks to the blind-stitching method on the outside, the lining is completely sealed. So the inside of the jacket and trousers is 100%waterproof and airtight.

SIZE CHART:

YAZBECK REDLINE SIZE CHART - BLUE HOLIC SCUBA

IMPORTANT NOTICE on all REDLINE Carbones: You will notice the Face opening is intentionally made smaller. If you need it larger you’ll have to modify it by cutting around the face seal.

We have included a template and directions on how to cut the face opening to desired size below: 

1. Print the TEMPLATE

Make sure your printing at 100% scale *Do a quick scale check and place a ruler next to printout*

2. Gather recommended tools to help make modifications:

  • SCISSORS
  • YAZBECK GLUE OR RUBBER CEMENT
  • SCRAP CARDBOARD
  • THREAD / NEEDLE (MAKE SURE ITS POLYESTER OR NYLON THREAD ONLY)
  • SPRAY TAC OR PAPER GLUE
  • LIQUID CHALK PEN OR SIMILAR (FOR DRAWING CUTTING LINE)
  • RULER

3. Watch this VIDEO: